Konica Minolta KIP 9900 User Guide - Page 94
User Mode A1 (Auto Initial Cut: Media), 2. 8.15 User Mode A2 (Auto Initial Cut: Length
![]() |
View all Konica Minolta KIP 9900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
2. 8.14 User Mode A1 (Auto Initial Cut: Media) Under a certain usage environment, the first print of a job sometimes would have a wrinkle or an image void if the prints are made with a roll media left in the deck for a long period. "Auto Initial Cut" makes an automatic initial cut in a specified amount at the leading edge before processing a job to obtain image quality and feed balance in such conditions. "Auto Initial Cut" can be specified which media type to be activated individually. Setting value Plain Tracing Film Bond Vellum 0 --- --- --- 1 X --- --- 2 --- X --- 3 X X --- 4 --- --- X 5 X --- X 6 --- X X 7 X X X 2. 8.15 User Mode A2 (Auto Initial Cut: Length) Under a certain usage environment, the first print of a job sometimes would have a wrinkle or an image void if the prints are made with a roll media left in the deck for a long period. "Auto Initial Cut" makes an automatic initial cut in a specified amount at the leading edge before processing a job. This setting can select the length to be cut of 300 / 450 / 600mm at the leading edge. Setting value 600 450 300 Description The amount to be cut is 600mm long. The amount to be cut is 450mm long. The amount to be cut is 300mm long. A shorter choice can reduce waste of media but is not enough to remove one full revolution of the roll. 2-72 Chapter 2 Basic Operations
![](/manual_guide/products/konica-minolta-kip-9900-user-guide-bc6c067/94.png)