Konica Minolta bizhub 4700P bizhub 4000P/4700P User Guide - Page 200
Toner specks appear on prints, Step 3, Warning-Potential, Damage
View all Konica Minolta bizhub 4700P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 200 highlights
User's Guide Action Yes Step 3 Go to step 4. Check if you are using a recommended type of paper. 1. Load the indicated tray or feeder with a recommended type of paper. 2. Resend the print job. No The problem is solved. Do vertical voids appear on prints? Step 4 Contact technical support. 1. Redistribute the toner in the imaging unit. Note: The laser scanning unit may be defective. a. Remove the toner cartridge, and then the imaging unit. b. Firmly shake the imaging unit. Warning-Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems. c. Reinstall the imaging unit, and then the cartridge. 2. Resend the print job. The problem is solved. Do vertical voids appear on prints? Toner specks appear on prints Action Yes No Replace the imaging unit, and then resend the print job. Contact technical support. The problem is solved. Do toner specks appear on prints? - 200 -