Konica Minolta bizhub C754 bizhub C654/C754 Copy Operations User Guide - Page 156
[Leading Edge Adjustment], [Centering], Start, Bypass Tray, Settings, Description
View all Konica Minolta bizhub C754 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
17 [Leading Edge Adjustment] To display: [Utility] - [Administrator Settings] - [System Settings] - [Expert Adjustment] - [Printer Adjustment] - [Leading Edge Adjustment] Adjust the print start position at the leading edge of the paper relative to the paper discharge direction. Press Start to print a test pattern. Check the test pattern and adjust so that the margin between the leading edge of the paper and the print start position is 3/16 inches (4.2 mm). Repeat adjustments, as required. Settings [Paper Type] [Adjust Value] Description Select the type of paper that is used to adjust the start position for printing. Enter an adjustment value between -3.0 and +3.0 mm by tapping [-] and [+]. [0.0 mm] is specified by default. [Centering] To display: [Utility] - [Administrator Settings] - [System Settings] - [Expert Adjustment] - [Printer Adjustment] - [Centering] Adjust the print start position on the left edge of the paper relative to the paper discharge direction. Press Start to print a test pattern. Check that the margin between the left edge and the print starting position is 3/16 inches (4.2 mm) (+/- 1/32 inch (+/- 0.5 mm)). Repeat adjustments, as required. Settings [Select Tray] [Adjust Value] Description Select a paper tray that is used to adjust the start position for printing. Enter an adjustment value between -3.0 and +3.0 mm by tapping [-] and [+]. [0.0 mm] is specified by default. Tips - Only 8-1/2 e 11 v (A4 v) paper can be used for adjusting the Bypass Tray. bizhub C754/C654 17-10