Konica Minolta bizhub C754 bizhub C654/C754 Copy Operations User Guide - Page 162
[Punch Vertical Position Adjustment], Punch Kit PK-521, Finisher FS-535, Settings, Description
View all Konica Minolta bizhub C754 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
17 [Punch Vertical Position Adjustment] To display: [Utility] - [Administrator Settings] - [System Settings] - [Expert Adjustment] - [Finisher Adjustment] - [Punch Vertical Position Adjustment] If the positions of the punch holes on the paper are displaced vertically, use this option to adjust the punch hole positions. Copy after configuration, then repeat adjustments as required. Settings [Paper Size] [Adjust Value] Description Select the size of paper subject to punch hole position adjustment. Enter an adjustment value between -5.0 and 5.0 mm by tapping [-] and Move the punch position downward. • [+]: Move the punch position upward. [0.0 mm] is specified by default. Tips - This item is available if the Punch Kit PK-521 is installed in the optional Finisher FS-535. - Make adjustments while checking paper punched at a displaced position. - The value you set by selecting [All] in [Paper Size] will be added to the setting for each paper size. [Punch Horizontal Position Adjustment] To display: [Utility] - [Administrator Settings] - [System Settings] - [Expert Adjustment] - [Finisher Adjustment] - [Punch Horizontal Position Adjustment] If the positions of the punch holes on the paper are displaced sideways, use this option to adjust the punch hole positions. Copy after configuration, then repeat adjustments as required. Settings [Finisher]/[Post Inserter] Description Select the position subject to punch hole position adjustment. • [Finisher]: This item is available if Punch Kit is installed in the optional Finisher. • [Post Inserter]: This item is available if the Punch Kit PK-521 and Post Inserter are installed in the optional Finisher FS-535. bizhub C754/C654 17-16