Konica Minolta pagepro 5650EN pagepro 4650EN/5650EN User Manual - Page 120

Finishing When the optional offset tray is installed, job separation and offset printing can be performed. For the installation procedure, refer to "Offset Tray" on page 214. Settings for job separation and offset printing can be specified by selecting JOB SEPARATION or FINISHING in PAPER MENU. " Use the following paper for job separation and offset printing. Media Size Width: 89 to 216 mm (3.5 - 8.5 inch) Length: 140 to 356 mm (5.5 - 14.0 inch) " Paper is fed to the sub output tray with job separation and offset print- ing. Job Separation Printing When paper is fed to the sub output tray, the pages are fed out shifted as shown below. " To perform job separation printing, select SUB TRAY in PAPER MENU/FINISHING . 1 2 3 1 2 3 4 1 2 110 Finishing