Konica Minolta pagepro 5650EN pagepro 4650EN/5650EN User Manual - Page 204
the two screws., Reinstall the panel and tighten
View all Konica Minolta pagepro 5650EN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 204 highlights
5 Remove the panel. 6 Insert the DIMM at an angle (about 45°) into the connector, making sure that the notch on the unit aligns with the tab on connector, and then press down carefully until it clicks into place. " Be sure to handle the DIMM by the edges only. " You will hear a click when the DIMM is properly placed. 7 Reinstall the panel and tighten the two screws. 8 Attach the right side cover. 9 Reconnect all interface cables. 10 Reconnect the power cord, and turn on the printer. 194 Dual In-Line Memory Module (DIMM)
Dual In-Line Memory Module (DIMM)
194
5
Remove the panel.
6
Insert the DIMM at an angle
(about 45°) into the connector,
making sure that the notch on
the unit aligns with the tab on
connector, and then press down
carefully until it clicks into place.
Be sure to handle the
DIMM by the edges only.
You will hear a click when
the DIMM is properly
placed.
7
Reinstall the panel and tighten
the two screws.
8
Attach the right side cover.
9
Reconnect all interface cables.
10
Reconnect the power cord, and
turn on the printer.