Konica Minolta pagepro 5650EN pagepro 4650EN/5650EN User Manual - Page 226
Declare Offset Tray in the Windows printer driver Properties/Con
View all Konica Minolta pagepro 5650EN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 226 highlights
4 Tighten the two screws at both ends of the bottom of the offset tray. 5 Draw the extension tray (1). " When printing a thick paper, you can flip the stopper as shown in the figure below (2). 6 Reconnect all interface cables. 7 Reconnect the power cord, and turn on the printer. 8 Declare Offset Tray in the Windows printer driver (Properties/Configure tab). 216 Offset Tray
Offset Tray
216
4
Tighten the two screws at both
ends of the bottom of the offset
tray.
5
Draw the extension tray (1).
When printing a thick
paper, you can flip the
stopper as shown in the
figure below (2).
6
Reconnect all interface cables.
7
Reconnect the power cord, and
turn on the printer.
8
Declare Offset Tray in the Windows printer driver (Properties/Configure
tab).