Kyocera KM-2050 1650/2050/2550 Operation Guide (Advanced) - Page 19

Copier Functions Interrupt Mode The interrupt mode can be used to stop output of copying or another job temporarily and to output urgent copy or print data or received fax data. After the interrupt processing is complete, the interrupted job can be resumed. The following modes are available for the interrupt function. Mode Interrupt copy Priority output Description • This mode can be used to stop copying and to make a copy of a different original at different settings. After the interrupt copy has been produced, the interrupted copying can be resumed at the same settings in effect prior to the interruption. • This mode can also be used to stop output of a job and to make a copy of another job. After the interrupt copy has been produced, the interrupted job is resumed. This mode can be used to interrupt output of a job and to output print data or received fax data with priority. After priority output is complete, the interrupted job is resumed. Note To use the fax functions, the optional fax kit must be installed. During a Copy Job 1 Press the Interrupt key. Interrupt mode OK [Interrupt mode] is displayed. 2 Store the originals for the current copying. 3 Set the original for interrupt copying and perform copying. 4 After the interrupt copying is complete, press the Interrupt key. The settings for the interrupted job are restored. 5 Replace the original with the originals that have been stored. Press the Start key to resume copying. During Output 1 Press the Interrupt key during output. Select Interrupt mode is displayed. Note 2 If the machine has neither print data nor received fax data, Interrupt mode OK [Interrupt mode] is displayed. Proceed to step 4. Press the S key or the T key to select the desired interrupt mode. Select Interrupt mode. Interrupt copy Priority:Printer Priority:Fax 1-11