Kyocera KM-C830D Printing System (P) Operation Guide (Setup Edition) - Page 10

2-3 Network (TCP/IP) settings When this machine is to be used as a network printer, it is necessary to set the corresponding IP address for the printer. Notes • The IP address that should be registered here will differ depending upon your network environment. Check with your network administrator BEFORE performing this setting. • If you are using a DHCP server to automatically configure the IP address, this setting will not be necessary because DHCP server configuration is already enabled as the factory default setting. 1 Press the Printer key. The machine will switch to the printer mode. Inch specification Metric specification 2 Use the M and N cursor keys to select "MENU" and then press the Enter key. Inch specification Metric specification 2. Set-up 3 Use the M and N cursor keys to select "Interface" and then press the Enter key. Inch specification Metric specification 4 Use the M and N cursor keys to select "Option 1" and then press the Enter key. Inch specification Metric specification 5 Use the M and N cursor keys to select "TCP/IP" and then press the Enter key. Inch specification Metric specification 5