Kyocera KM-C830D Printing System (P) Operation Guide (Setup Edition) - Page 6
Preparations
View all Kyocera KM-C830D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
1. Preparations 1-1 Accessories • Digital Library CD-ROM • Network Library CD-ROM • This Operation Guide • Quick Configuration Guide (for the network interface) 1-2 Required items Be sure to prepare the cable that is appropriate to your situation as follows. • If you are connecting the printer directly to your computer: One parallel cable (IEEE 1284 compliant, less than 1.5 m in length) • If you are connecting the printer to a network: One network cable (100BASE-TX or 10BASE-T cable) * When using a 100BASE-TX or 10BASE-T cable, be sure to use the shielded type of cable. * Depending upon the area or region of purchase, the optional Network Card may be required in order to connect your printer to a network. 1-3 Name of parts (main body) 6 5 1 2 3 4 1 Parallel interface connector Connect a bi-directional parallel cable here. 2 Serial interface connector Connect a serial cable here. If you are using the optional Barcode Reader, attach it to this connector. 3 Network interface connector Connect a 100BASE-TX or 10BASE-T cable here in order to connect the printer to a network. * Depending upon the area or region of purchase, the optional Network Card may not be standard equipment with this printer. * NEVER remove the Network Card. 4 Memory Card (CompactFlash) slot Insert the optional Memory Card (CompactFlash) here. 5 Main switch Turn this switch ON ( | ) first, prior to using the printer. Always turn this switch OFF (O) when connecting the printer cable, etc. 6 Operation panel Use when performing settings, etc., at the printer itself. 1