Kyocera KM-C830D Printing System (P) Operation Guide (Setup Edition) - Page 12
Subnet Mask
View all Kyocera KM-C830D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
12 Press the P cursor key and then enter the next 3 digits of the IP address into the next highlighted block. Inch specification 2. Set-up 15 Repeat steps 11 - 13 in order to enter the Subnet Mask using the same procedure that you did for entering the IP address. Inch specification Metric specification Metric specification 13 Continue the same procedure for the other 2 blocks and, once the IP address has been entered, press the Enter key. Inch specification 16 Use the M and N cursor keys to select "Gateway" and then press the Enter key. Inch specification Metric specification Metric specification 14 Use the M and N cursor keys to select "Subnet Mask" and then press the Enter key. Inch specification 17 Repeat steps 11 - 13 in order to enter the Gateway address using the same procedure that you did for entering the IP address. Inch specification Metric specification Metric specification 18 Once you are finished making all of the network settings, press the Copier key. The machine will switch back to the copier mode. 7