Kyocera TASKalfa 4820w TASKalfa 4820w Operation Guide - Page 11

1. 4. 2 Printer part Specification LED Array Electro photography Organic Photoconductive Drum 80mm per second (Inch) 3.4ppm/E 5.8ppm/D Landscape (Metric) 3.3ppm/A0 5.6ppm/A1 Landscape LED Array 600dpi x 600dpi Maximum 914mm / 36" Minimum or 297mm / 11" (roll media) or 210mm / 8.5" (cut sheet) Maximum (Standard) 6,000mm / 19.7ft for 36" / A0 wide (plain paper / bond) or "5 x Standard length" (plain paper / bond) "2 x Standard length" (tracing paper / vellum) "1 x Standard length" (film) (Option) 200,000mm Minimum 210mm / 8.5" Subject Printing method Photoreceptor Print speed Print head Resolution of print head Print width Print length NOTE If the print is longer than 6,000mm, its image quality or the reliability of paper feeding is not guaranteed. Print size (from Paper Tray, option) ISO (mm) Width Length 420 297 594 X 420 X 297 X 210 X ANSI (inch) Width Length 18 17 12 11 24 X 22 X X X 18 17 12 X 11 X X X 9 8.5 Warm up time First print time Fusing method Development method Shorter than 4 minutes 30 seconds (At 23oC, 60%RH, the rated voltage, and plain paper is used) 22 seconds (D Landscape, Front Stacking) (At 23oC, 60%RH, the rated voltage, and plain paper is used) Heat and Pressure Rollers Dry type non-magnetic mono-component toner NOTE The above specifications are subject to change without notice. 1-6 Chapter 1 Before Use