Kyocera TASKalfa 4820w TASKalfa 4820w Operation Guide - Page 28
Kyocera TASKalfa 4820w Manual
View all Kyocera TASKalfa 4820w manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
5. Insert each Flange (2) into both ends of the roll media core to be installed. 2 NOTE (1) Fully insert Flange into the roll media core so that the inside rim of Flange evenly touches the side face of the roll media. Inside Rim Inside Rim Gap Correct: Fully inserted Wrong: not touching roll side (2) Flange has Stoppers with sharp edge. Be sure not to touch them. 6. Push both the levers (4) down in either way. Position them flat against Flange to secure the roll media. 4 4 2-7 Chapter 2 Basic Operation
Chapter 2
Basic Operation
2-7
5. Insert each Flange (2) into both ends of the roll media core to be installed.
6. Push both the levers (4) down in either way. Position them flat against Flange to secure the roll
media.
NOTE
(1) Fully insert Flange into the roll media core so that the inside rim of Flange evenly touches
the side face of the roll media.
Correct
: Fully inserted
Wrong
: not touching roll side
(2) Flange has Stoppers with sharp edge. Be sure not to touch them.
Inside Rim
Gap
Inside Rim
2
4
4