LG 26LD320H Setup Guide - Page 51

Reference: LD320H/LD325H & LD340H/LD345H Rear Jack Panel RJP Connection for Remote Jack Pack (RJP) Control cable. UPDATE Restricted to software updates. RESET Initiates a hardware reset and switches the TV to standby. AUDIO IN (RGB/DVI) Audio connection for RGB or DVI device. REMOTE CONTROL OUT IR output for controlling an auxiliary device. AUDIO/VIDEO IN 1 Connection for composite audio/ video output from external device. RESET UPDATE HDMI 2 .......... HDMI /DVI IN 1 .......... RJP RGB IN (PC) SPEAKER OUT (8 ) REMOTE CONTROL OUT AUDIO IN (RGB/DVI) RS-232C IN (SERVICE ONLY) ......... AV IN 1 VIDEO L/MONO-AUDIO-R ANTENNA IN GAME CONTROL/ MPI TV-LINK CFG Y PB PR VIDEO L R AUDIO COMPONENT IN ANTENNA IN 26LD320H, 26LD340H, & 26LD345H only. Connect to Antenna/CATV. RS-232C IN Use for downloading software updates, etc. TV-LINK CFG Use for direct PC-to-TV FTG configuration. HDMI/DVI IN Connection for HDMI/DVI output from external device. RGB IN (PC) Connection for RGB output from PC. COMPONENT IN Connection for component output from external device. SPEAKER OUT (8Ω) * Connect to 8 ohm self-powered speaker input. Intended for special applications, such as a powered bathroom speaker with volume control. GAME CONTROL/MPI ** When the TV/EBL is in Pass-through Mode, the MPI function enables an external MPI control device (i.e., clone programmer, VOD/ PPV STB, etc.) to control the TV. Game Control-EBL in LodgeNet PPV Mode only. * This stereo jack provides a mono speaker fixed-level, 1 watt output (audio +, audio -, w/ground shield). Do NOT plug in a mono connector, as this may damage the TV. ** On 32/37/42LD320H and 32/37LD325H TVs, this is a GAME CONTROL port only. GAME CONTROL function as described above. On these TVs, the MPI port is located on the same plate as the RF Antenna jack (see next page). 206-4186 51