LG 42LB5RT Owner's Manual - Page 112
Volume Control Command: k f, To control Power On/Off of the TV.
View all LG 42LB5RT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
APPENDIX 01. Power (Command: k a) To control Power On/Off of the TV. Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off Data 01 : Power On Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x] To show Power On/Off. Transmission [k][a][ ][Set ID][ ][FF][Cr] Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x] * If there is the time delay between command and ack message during power on sequence, It should be described like "Note: In this model, TV will send the Acknowledge after power on processing completion. There might be a time delay between command and acknowledge." 02. Aspect Ratio (Command: k c) (Main picture size) To adjust the screen format. (Main picture format) You can adjust the screen format using the Aspect Ratio in the Picture menu. Transmission [k][c][ ][Set ID][ ][Data][Cr] Data 01: Normal screen (4:3) Data 02: Wide screen (16:9) Data 04: Zoom1 Data 05: Zoom2 Data 06: Original Data 07: 14:9 Data 09: Just Scan(Except 22LG3***) Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x] * Using the RGB-PC, Component or HDMI input, you select either 16:9 or 4:3 screen aspect ratio. * In HDMI/Component (over 720p)mode,J Just Scan is available. 05. Volume Control (Command: k f) To adjust volume. You can also adjust volume with the volume buttons on remote control. Transmission [k][f][ ][Set ID][ ][Data][Cr] Data Min : 00 ~ Max : 64 Refer to 'Real data mapping 1 '. See page112. Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x] 06. Contrast (Command: k g) To adjust screen contrast. You can also adjust contrast in the Picture menu. Transmission [k][g][ ][Set ID][ ][Data][Cr] Data Min : 00 ~ Max : 64 Refer to 'Real data mapping 1'. See page112. Acknowledgement [g][ ][Set ID][ ][OK][Data][x] 07. Brightness (Command: k h) To adjust screen brightness. You can also adjust brightness in the Picture menu. Transmission [k][h][ ][Set ID][ ][Data][Cr] Data Min : 00 ~ Max : 64 Refer to 'Real data mapping 1'. See page112. Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x] 03. Screen Mute (Command: k d) To select screen mute on/off. Transmission [k][d][ ][Set ID][ ][Data][Cr] Data 00 : Screen mute off (Picture on) Data 01 : Screen mute on (Picture off) Acknowledgement [d][ ][Set ID][ ][OK/NG][Data][x] 08. Colour (Command: k i) To adjust the screen colour. You can also adjust colour in the Picture menu. Transmission [k][i][ ][Set ID][ ][Data][Cr] Data Min : 00 ~ Max : 64 Refer to 'Real data mapping 1'. See page112. Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x] APPENDIX 110 04. Volume Mute (Command: k e) To control volume mute on/off. You can also adjust mute using the MUTE button on remote control. Transmission [k][e][ ][Set ID][ ][Data][Cr] Data 00 : Volume mute on (Volume off) Data 01 : Volume mute off (Volume on) Acknowledgement [e][ ][Set ID][ ][OK/NG][Data][x] 09. Tint (Command: k j) To adjust the screen tint. You can also adjust tint in the Picture menu. Transmission [k][j][ ][Set ID][ ][Data][Cr] Data Red : 00 ~ Green : 64 Refer to 'Real data mapping 1'. See page112. Acknowledgement [j][ ][Set ID][ ][OK/NG][Data][x]