Lacie Network Space 2 User Manual - Page 56
Troubleshooting the Network Connection,
View all Lacie Network Space 2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
LaCie Network Space 2 • DESIGN BY NEIL POULTON User Manual Troubleshooting page 56 5.4. Troubleshooting the Network Connection Problem Question Solution The USB drive/key or USB printer connected to the USB expansion port is not recognized. Is the Network Space 2 connected to your computer via USB? Devices connected to the USB expansion port (hard drive or printer) are automatically unmounted when you connect the Network Space 2 to a computer via USB. To make the external hard drive or printer accessible, disconnect the Network Space 2 from your computer and connect it to the network using the Ethernet cable. I connected a USB drive to the USB expansion port, but the drive does not mount and is not listed in LaCie Network Assistant. Is the USB drive formatted in MS-DOS (FAT32) and is its capacity more than 500 GB? Reformat the drive in a different file format. The Network Space 2 is not recognized by the computer. Does your computer's configuration meet the minimum system requirements? Check section 1.1. Minimum System Requirements for more information. Is the system's power supply connected and is the LED on the front of the drive on? Make sure that the power supply is properly connected (see section 2.2. STEP 2: Connect the Ethernet Cable for details); that the system has been powered on pushing the power button; and that the outlet the power supply is connected to is powered on or has a sufficient supply of power. Is the LED on the front of the device flickering for an inordinate period of time? If the LED is flickering or will not turn on, the power supply may be defective. Please contact your LaCie reseller or LaCie Customer Support. Did you follow the correct installation steps? Review the installation steps (2. Connecting to a Network). Are both ends of the Ethernet cable firmly connected? Disconnect the Ethernet cable, wait 10 seconds and then reconnect. Ensure that the interface connectors are properly aligned. The Ethernet cable can only be inserted one way. Make sure it is correctly oriented. Check that the Ethernet connectors are straight and fully seated in the Ethernet ports. Make sure that you use the Ethernet cord provided in the LaCie Network Space 2 box. continued on the next page >>