Lantronix EDS1100 EDS1100 / EDS2100 - User Guide - Page 24
Top LEDs, Installing the EDS1100
View all Lantronix EDS1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
3: Installation of EDS1100 Top LEDs Figure 3-6 shows the top of the EDS1100 and Table 3-7 lists and describes the LEDs that are on the top of the device. Figure 3-6 EDS1100 Top LEDs Table 3-7 EDS1100 LEDs and Descriptions LED Power (blue) Description ON-EDS is receiving power TX Serial (green) RX Serial (yellow) Diagnostic Blinking-EDS is transmitting data on the serial port Blinking-EDS is receiving data on the serial port ON-EDS firmware has completed booting Blinking 1x/sec-EDS firmware is booting Blinking 2x/sec-EDS is writing a file to flash Blinking 4x/sec-EDS is compacting the file system Blinking 5x/sec-EDS is restoring factory defaults Installing the EDS1100 Be sure to place the device on a flat horizontal or vertical surface. The device comes with mounting brackets for mounting the device vertically, for example on a wall. If using AC power, avoid outlets controlled by a wall switch. Observe the following guidelines when connecting the serial devices: The EDS1100 serial ports support RS-232/422/485 devices. EDS1100/2100 User Guide 24