Lantronix EDS1100 EDS1100 / EDS2100 - User Guide - Page 75
Syslog Settings, To con the Syslog, Syslog, Submit
View all Lantronix EDS1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
10: Service Settings Syslog Settings The Syslog web page shows the current configuration and statistics of the system log. To configure the Syslog Note: The syslog file is always saved to local storage, but it is not retained through reboots. Saving the syslog file to a server that supports remote logging services (see RFC 3164) allows the administrator to save the complete syslog history. The default port is 514. 1. Click Syslog on the menu bar. The Syslog page opens to display the current configuration. Figure 10-9 Syslog 2. Enter or modify the following settings: Syslog Settings State Host Local Port Remote Port Severity Log Level 3. Click Submit. Table 10-10 Syslog Description Select to enable or disable the syslog. Enter the IP address of the remote server to which system logs are sent for storage. Enter the number of the local port on the device from which system logs are sent. Enter the number of the port on the remote server that supports logging services. The default is 514. From the drop-down box, select the minimum level of system message the device should log. This setting applies to all syslog facilities. The drop-down list is in descending order of severity (e.g., Emergency is more severe than Alert.) EDS1100/2100 User Guide 75