Lantronix EDS1100 EDS1100 / EDS2100 - User Guide - Page 40
DHCP Client, IP Address, Default Gateway, <None>, Hostname, Domain, Primary DNS, Secondary DNS
View all Lantronix EDS1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
7: Network Settings Network 1 Interface Configuration Settings Description DHCP Client Select On or Off. At boot up, the device will attempt to lease an IP address from a DHCP server and maintain the lease at regular intervals. Note: Overrides BOOTP, the configured IP address, network mask, gateway, hostname, and domain. IP Address Enter the device static IP address. You may enter it alone, in CIDR format, or with an explicit mask. The IP address consists of four octets separated by a period and is used if BOOTP and DHCP are both set to Off. Changing this value requires you to reboot the device. Note: When DHCP is enabled, the device tries to obtain an IP address from DHCP. If it cannot, the device uses an AutoIP address in the range of 169.254.xxx.xxx. Default Gateway Enter the IP address of the router for this network. Or, clear the field (appears as ). This address is only used for static IP address configuration. Hostname Enter the device hostname. It must begin with a letter, continue with a sequence of letters, numbers, and/or hyphens, and end with a letter or number. Domain Enter the device domain name. DHCP Client ID Enter the ID if the DHCP server uses a DHCP ID. The DHCP server's lease table shows IP addresses and MAC addresses for devices. The lease table shows the Client ID, in hexadecimal notation, instead of the device MAC address. Primary DNS IP address of the primary name server. This entry is required if you choose to configure DNS (Domain Name Server) servers. Secondary DNS IP address of the secondary name server. MTU When DHCP is enabled, the MTU size is (usually) provided with the IP address. When not provided by the DHCP server, or using a static configuration, this value is used. The MTU size can be from 576 to 1500 bytes. 3. Click Submit to save changes. Some changes to the following settings require a reboot for the changes to take effect: BOOTP Client DHCP Client IP Address DHCP Client ID Note: If DHCP or BOOTP fails, AutoIP intervenes and assigns an address.A new DHCP negotiation is attempted every 5 minutes to obtain a new IP address. When the DHCP is enabled, any configured static IP address is ignored. EDS1100/2100 User Guide 40