Lantronix EDS1100 EDS1100 / EDS2100 - User Guide - Page 26
: Installation of EDS2100, Package Contents, User-Supplied Items, Hardware Components
View all Lantronix EDS1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
4: Installation of EDS2100 This chapter describes how to install the EDS2100 device server. It contains the following sections: Package Contents User-Supplied Items Hardware Components Installing the EDS2100 Package Contents The EDS2100 package includes the following items: One EDS2100 device One DB9F-to-DB9F serial null modem cable Power Cube, 100-240 VAC with international adapters Power cord restraint Printed Quick Start Guide User-Supplied Items To complete your installation, you need the following items: RS-232/422/485 serial devices that require network connectivity. A serial cable, as listed below, for each serial device. One end of the cable must have a female DB9 connector for the serial port. - A null modem cable, such as the one supplied in your EDS2100 package, to connect the serial port to another DTE device. - A straight-through modem cable to connect the serial port to a DCE device. An available connection to your Ethernet network and an Ethernet cable. A working power outlet if the unit will be powered from an AC outlet. Hardware Components The EDS2100 has two male DB9 serial ports that support RS-232/422/485. Figure 4-1 shows the front of the device. The default serial port settings are 9600 baud, 8 bits, no parity, 1 stop bit, no flow control. EDS1100/2100 User Guide 26