Lantronix EDS32PR EDS - Command Reference - Page 181
Restores the default Maximum Transmission Unit MTU, Shows ICMP statistics
![]() |
View all Lantronix EDS32PR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 181 highlights
secure protocols tls1.0 enable secure protocols tls1.1 disable secure protocols tls1.1 enable show show auth show history show log show statistics state disable state enable write icmp (config-icmp) level commands auto show statistics clear counters clrscrn exit no clear counters show show history show statistics state disable state enable write if 1 (config-if:eth0) level commands bootp disable bootp enable clrscrn default gateway default mtu dhcp client id binary dhcp client id set dhcp disable dhcp enable dhcp renew domain exit hostname ip address EDS Command Reference 5: Commands and Levels Enables the protocol. Disables the protocol. Enables the protocol. Displays the current configuration. Displays the HTTP server authentication settings. Displays the last 20 commands entered during the current CLI session. Displays the HTTP server log. Displays the HTTP statistics. Disables the HTTP server. Enables the HTTP server. Stores the current configuration in permanent memory. Continuously shows ICMP statistics Zeros counters Clears the screen. Exits to the configuration level. Unzeros IP counters Displays the current configuration. Displays the last 20 commands entered during the current CLI session. Shows ICMP statistics Prevents ICMP packets from being sent or received. Allows ICMP packets to be sent and received. Stores the current configuration in permanent memory. Disables BOOTP. Enables BOOTP. Clears the screen. Sets the configurable gateway IP address to the default value. Restores the default Maximum Transmission Unit (MTU) size. Sets the client id allowing binary characters. Within [] use binary decimal up to 255 or hex up to 0xFF. Sets the client id in text format. Disables DHCP. Enables DHCP. Force DHCP to renew Sets the domain name. = name of the domain. Exits to the config level. Sets the host name. = name of the host. Sets the IP address and network mask. Formats accepted: 192.168.1.1 (default mask) 192.168.1.1/24 (CIDR) "192.168.1.1 255.255.255.0" (explicit mask) 181
![](/manual_guide/products/lantronix-eds8pr-eds-command-reference-32f14d3/181.png)