Lantronix EDS32PR EDS - Command Reference - Page 207
Display the RSS Feed status, rss modbus-rss level commands, rtc config-rtc level commands
![]() |
View all Lantronix EDS32PR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 207 highlights
5: Commands and Levels show status Display the RSS Feed status write Stores the current configuration in permanent memory. rss (modbus-rss) level commands clrscrn Clears the screen. exit Exits to the next higher level. show Shows the current configuration. show history Displays the last 20 commands entered during the current CLI session. trace input disable Disables RSS trace of Modbus PDUs received on the serial line. trace input enable Enables RSS trace of Modbus PDUs received on the serial line. write Stores the current configuration in permanent memory. rtc (config-rtc) level commands clock set Sets the system clock. clock timezone Shows possible time zone names. clock timezone Sets the timezone to be displayed. clock timezone Sets the timezone to be displayed. clrscrn Clears the screen. default clock timezone Restores the default timezone, which is GMT. exit Exits to the configuration level. show Displays the system clock. show history Displays the last 20 commands entered during the current CLI session. write Stores the current configuration in permanent memory. serial (tunnel-serial:4) level commands clrscrn Clears the screen. default dtr Restores default DTR control, asserted while connected. dtr asserted while connected Asserts DTR whenever a connect or accept mode tunnel connection is active. dtr continuously asserted Asserts DTR regardless of any connections. dtr truport Asserts DTR to match remote DSR when connected via Telnet. dtr unasserted Does not assert DTR. exit Returns to the tunnel level. show Displays the current configuration. show history Displays the last 20 commands entered during the current CLI session. write Stores the current configuration in permanent memory. serial (tunnel-serial:3) level commands clrscrn Clears the screen. default dtr Restores default DTR control, asserted while connected. dtr asserted while connected Asserts DTR whenever a connect or accept mode tunnel connection is active. dtr continuously asserted Asserts DTR regardless of any connections. dtr truport Asserts DTR to match remote DSR when connected via Telnet. dtr unasserted Does not assert DTR. EDS Command Reference 207
![](/manual_guide/products/lantronix-eds8pr-eds-command-reference-32f14d3/207.png)