Lantronix EDS32PR EDS - Command Reference - Page 185
line 2 line:2 level commands, command mode signon message
View all Lantronix EDS32PR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 185 highlights
write xoff char xon char line 2 (line:2) level commands auto show statistics baud rate clear line counters clrscrn command mode always command mode echo serial string disable command mode echo serial string enable command mode serial string command mode serial string command mode serial string binary command mode signon message command mode signon message binary command mode wait time configure current settings data bits 7 data bits 8 default baud rate default data bits 5: Commands and Levels configured. Stores the current configuration in permanent memory. Sets the xoff character for use with software flow control on this line. The character may be input as text, control, decimal, or hex. A control character has the form C. A decimal value character has the form \99. A hex value character has the form 0xFF. Sets the xon character for use with software flow control on this line. The character may be input as text, control, decimal, or hex. A control character has the form C. A decimal value character has the form \99. A hex value character has the form 0xFF. Continuously displays line statistics. Sets the line speed. = the speed. Standard speeds include 1200, 2400, 4800, 9600, 19200, and so on. Sets the serial counters to zero. Clears the screen. Sets the current line to always be in command mode. Disables user-defined serial boot string to be echoed in the CLI. Enables user-defined serial boot string to be echoed in the CLI. Enables user to enter a custom string at boot time to enter command mode. Sets a string that can be entered at boot time to enter command mode. = text. Sets a binary string that can be entered at boot time to enter command mode. = string that may contain binary characters. Within [] use binary decimal up to 255 or hex up to 0xFF. Sets an ASCII sign-on message that is sent from the serial port when the device boots and when the line is in command mode. = text. Sets a binary sign-on message that is sent from the serial port when the device boots and when the line is in command mode. = string that may contain binary characters. Within [] use binary decimal up to 255 or hex up to 0xFF. Sets boot-up wait time for command mode serial string. = wait time. Configures line with the current value of settings. Uses seven bits for data on the line. Uses eight bits for data on the line. Restores the default speed of 9600 bits per second. Restores the default of eight data bits. EDS Command Reference 185