Lantronix EDS32PR EDS - Command Reference - Page 71
disconnect tunnel-disconnect:2 level commands, forwarded to the network.
View all Lantronix EDS32PR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
5: Commands and Levels stop character timeout write disconnect (tunnel-disconnect:2) level commands clrscrn exit flush serial disable flush serial enable flush stop character disable flush stop character enable modem control disable modem control enable no stop character no timeout show show history stop character timeout write disconnect (tunnel-disconnect:1) level commands clrscrn exit flush serial disable flush serial enable flush stop character disable flush stop character enable modem control disable modem control enable Sets the stop character. The character may be input as text, control, decimal, or hex. A control character has the form C. A decimal value character has the form \99. A hex value character has the form 0xFF. Disconnects when no data has been received on the line (serial port) for the specified length of time. = timeout in milliseconds. Stores the current configuration in permanent memory. Clears the screen. Returns to the tunnel level. Does not flush serial data upon closing a tunneling connection. Flushes serial data buffer when a tunneling connection is closed. Forwards the stop character from the Line to the network. Prevents the stop character from the Line from being forwarded to the network. Does not watch the modem control pin to disconnect. Watches the modem control pin and disconnects if it is not asserted. Removes the stop character. Disables disconnect after timeout feature for tunneling sessions. Displays the current configuration. Displays the last 20 commands entered during the current CLI session. Sets the stop character. The character may be input as text, control, decimal, or hex. A control character has the form C. A decimal value character has the form \99. A hex value character has the form 0xFF. Disconnects when no data has been received on the line (serial port) for the specified length of time. = timeout in milliseconds. Stores the current configuration in permanent memory. Clears the screen. Returns to the tunnel level. Does not flush serial data upon closing a tunneling connection. Flushes serial data buffer when a tunneling connection is closed. Forwards the stop character from the Line to the network. Prevents the stop character from the Line from being forwarded to the network. Does not watch the modem control pin to disconnect. Watches the modem control pin and disconnects if it is not EDS Command Reference 71