Lantronix EDS32PR EDS - Command Reference - Page 58
accept tunnel-accept:1 level commands
View all Lantronix EDS32PR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
no local port no tcp keep alive password protocol ssh protocol ssl protocol tcp protocol tcp aes protocol telnet show show history show status start character tcp keep alive write accept (tunnel-accept:1) level commands accept mode always accept mode any character accept mode disable accept mode modem control asserted accept mode modem emulation accept mode start character aes decrypt key aes decrypt key text EDS Command Reference 5: Commands and Levels Uses the default port number as the local port for accept mode tunneling. The default port is 10000 + #, where # is the line number for this tunnel. Disables the accept mode TCP keep alive timeout. Enters the next lower level. Uses SSH protocol for accept mode tunneling. Uses SSL protocol for accept mode tunneling. Uses TCP protocol for accept mode tunneling. Uses TCP protocol with AES encryption for accept mode tunneling. Uses Telnet protocol (with IAC) for accept mode tunneling. Displays the current configuration. Displays the last 20 commands entered during the current CLI session. Displays tunnel accept status. Sets the accept mode start character. The character may be input as text, control, decimal, or hex. A control character has the form C. A decimal value character has the form \99. A hex value character has the form 0xFF. Enables TCP keep alive for accept mode tunneling and sets the timer. = timer value, in milliseconds. Stores the current configuration in permanent memory. Enables the tunneling server to always accept tunneling connections. Enables the tunneling server to accept tunneling connections only when a character is received through the corresponding line (serial port). Disables accept mode tunneling. Enables the tunneling server to accept tunneling connections when the modem control pin is asserted. Enables modem emulation for accept mode tunneling. Enables accept mode tunneling when the configured start character is received on the line. Sets the accept tunnel AES decrypt key with up to 16 bytes. Each byte is represented by two adjacent hex digits. Bytes may run together or be separated by optional punctuation: 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that quotes must enclose the value if it contains spaces. Sets the accept tunnel AES decrypt key with up to 16 bytes. Each byte is represented by a single character. Note that quotes must enclose the value if it contains 58