Lantronix EDS32PR EDS - Command Reference - Page 203
packing tunnel-packing:2 level commands, default packing mode
![]() |
View all Lantronix EDS32PR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 203 highlights
packing mode timeout send character show show history threshold timeout trailing character write packing (tunnel-packing:2) level commands clrscrn default packing mode default send character default threshold default timeout exit no trailing character packing mode disable packing mode send character packing mode timeout send character show show history threshold EDS Command Reference 5: Commands and Levels upon receiving the configured send character on the line (serial port). Sets packing mode to accumulate data and transmit it after a specified amount of time (timeout). Sets the send character for packing mode. The character may be input as text, control, decimal, or hex. A control character has the form C. A decimal value character has the form \99. A hex value character has the form 0xFF. Displays the current configuration. Displays the last 20 commands entered during the current CLI session. Sets the threshold (byte count). If the queued data reaches this threshold then the data will be sent. = number of bytes in the threshold. Sets the timeout value for packing mode in milliseconds. = timeout value, in milliseconds. Sets the trailing character for packing mode. The character may be input as text, control, decimal, or hex. A control character has the form C. A decimal value character has the form \99. A hex value character has the form 0xFF. Stores the current configuration in permanent memory. Clears the screen. Sets to default packing mode, which is "Disable" Removes the send character for packing mode. Restores the default threshold. Restores the default packing mode timeout. Returns to the tunnel level. Removes the trailing character for packing mode. Disables packing. Data is sent to the network when received. Sets packing mode to accumulate data and transmit it upon receiving the configured send character on the line (serial port). Sets packing mode to accumulate data and transmit it after a specified amount of time (timeout). Sets the send character for packing mode. The character may be input as text, control, decimal, or hex. A control character has the form C. A decimal value character has the form \99. A hex value character has the form 0xFF. Displays the current configuration. Displays the last 20 commands entered during the current CLI session. Sets the threshold (byte count). If the queued data reaches this threshold 203
![](/manual_guide/products/lantronix-eds8pr-eds-command-reference-32f14d3/203.png)