Lantronix EDS32PR EDS - Command Reference - Page 67
connect tunnel-connect:1 level commands, A control character has the form <control>C.
![]() |
View all Lantronix EDS32PR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
flush start character disable flush start character enable host host mode sequential host mode simultaneous kill connection local port no email connect no email disconnect promote host reconnect time show show history show status start character write connect (tunnel-connect:1) level commands block network disable block network enable block serial disable block serial enable clrscrn connect mode always connect mode any character EDS Command Reference 5: Commands and Levels connection. Enables forwarding of the connect start character into the network. Disables forwarding of the connect start character into the network. Enters the next lower level. Specify the instance for the next lower level. Connects to the first host in the list that accepts the connection. Selects simultaneous connections to all hosts on the host list. Disconnects the active connect mode tunneling connection or connections. Sets a specific port for use as the local port. = the number of the port to use. Discontinues sending email alerts upon establishing a connect mode tunnel. Discontinues sending email alerts upon closing a connect mode tunnel. Promotes the identified host, exchanging it place with the host above it, to adjust the order of the defined hosts. Sets the reconnect time value for tunneling connections established by the device in milliseconds. = timeout in milliseconds. Displays the current configuration. Displays the last 20 commands entered during the current CLI session. Displays tunnel connect status. Sets the connect mode start character. The character may be input as text, control, decimal, or hex. A control character has the form C. A decimal value character has the form \99. A hex value character has the form 0xFF. Stores the current configuration in permanent memory. Forwards (tunnels) network data in connect mode tunneling. Discards all data coming in from the connect mode tunnel before forwarding it to the serial interface (generally used for debugging). Forwards (tunnels) serial data in connect mode tunneling. Discards all data coming in from the serial interface before forwarding it to the connect mode tunnel (generally used for debugging). Clears the screen. Enables the tunneling server to always establish tunneling connections. Enables the tunneling server to establish a tunneling connection when a character is received on the corresponding line (serial 67
![](/manual_guide/products/lantronix-eds8pr-eds-command-reference-32f14d3/67.png)