Lantronix EDS32PR EDS - Command Reference - Page 198
Restores the default Modbus Response Timeout., modbus modbus level commands
![]() |
View all Lantronix EDS32PR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 198 highlights
exit formfeed disable formfeed enable kill line lpd no eoj text no queue name no soj text queue name show show history show statistics soj disable soj enable soj text binary soj text set terminal terminal network test print tunnel write modbus (modbus) level commands additional port clrscrn default response timeout exit kill connection EDS Command Reference 5: Commands and Levels end of each print job. Exits to the configuration level. Disables the printer from advancing to the next page at the end of each print job. Forces the printer to advance to the next page at the end of each print job. Ends the current print job on this lpd line. Enters the line level. = number of the line (serial port) to be configured. Enters the configure lpd level. = number of the line (lpd serial port) to be configured. Removes the end-of-job string. Removes the queue name. Removes the start-of-job string. Sets the name of the queue that this lpd line belongs to. = name for the queue. Displays the current configuration. Displays the last 20 commands entered during the current CLI session. Displays statistics and status information for this lpd line. Disables sending the start-of-job string after each print job. Enables sending the start-of-job string after each print job. Sets the start-of-job text allowing for binary characters. = string in binary format that will be sent to the printer at the beginning of each print job. Within [] use binary decimal up to 255 or hex up to 0xFF. Sets the start-of-job text. = ascii string that will be sent to the printer at the beginning of each print job. Enters the configure-terminal level. = number of the terminal line (serial port) to be configured. Enters the configure-terminal level for the network. Prints lines of text directly to the lpd line. = number of lines to print. Enters the tunnel level. = number of the tunnel line (serial port) to be configured. Stores the current configuration in permanent memory. Sets an additional TCP server port. Clears the screen. Restores the default Modbus Response Timeout. Exits to the config level. Kills modbus connection selected by index from show connections. 198
![](/manual_guide/products/lantronix-eds8pr-eds-command-reference-32f14d3/198.png)