Lantronix EPS2-100 EPS2-100 - Install Guide - Page 102
Table M-2, Port Commands, cont.
View all Lantronix EPS2-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Frequently-used Commands Table M-2: Port Commands, cont. Command Option(s) Description DEFINE PORT nn DTRWAIT {EN|DIS} When Enabled, the Server will not assert DTR on the port when it is idle (no user logins or connections). DEFINE PORT nn FLOW option CTS {EN|DIS} Specifies CTS/RTS (hardware) flow control. Activates or deactivates the currently-configured flowcontrol method. NONE XON DEFINE PORT nn NAME "newname" Removes the current flow control settings. Specifies XON/XOFF (software) flow control. Enter a name of up to 16 alphanumeric characters for the specified port. DEFINE PORT nn PARITY option parity NONE Enter even, odd, mark, or space. Specifying mark or space will change the character size to 7 bits. Specifies that no parity will be used (the default). DEFINE PORT nn SPEED baudnum Sets the port's baud rate. Acceptable baudnum values range from 300 to 115200 baud (or 230000 baud for 1ooBASE-T Servers). M - 10