Lantronix EPS2-100 EPS2-100 - Install Guide - Page 104
M.3 Protocol Commands, Table M-3
View all Lantronix EPS2-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Frequently-used Commands M.3 Protocol Commands In the following table, PROTO is an abbreviation for the optional keyword PROTOCOL. Table M-3: Protocol Commands Command Option(s) DEFINE PORTS nn IPSECURITY ipaddress option Note: An ipaddress with a 0 in any segment implies Incoming and Out- INCOMING going Disabled. An {EN|DIS} ipaddress with a 255 in any segment applies to all addresses in that range. OUTGOING {EN|DIS} Note: Rules are applied in BOTH {EN|DIS} the order in which they are entered. PRINTING {EN|DIS} Description Restricts connections to the specified IP address from the specified ports, and connections from the IP address to the specified ports. If no port (nn) is specified, the command applies to all physical and virtual ports. See the Port Commands section for information about port lists. Allows or restricts connections and serial port logins from the specified address (on the network) into the Server. Allows or restricts Telnet sessions to the specified address (on the network) from the Server. Allows or restricts connections to and from the specified address. Allows or restricts TCP/IP-based printing for the specified address. M - 12