Lantronix EPS2-100 EPS2-100 - Install Guide - Page 18

Setting the IP Address, 4.1.1 Using EZWebCon

Get Lantronix EPS2-100 PDF manuals and user guides View all Lantronix EPS2-100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

TCP/IP Configuration 4.1 Setting the IP Address The EPS IP address must be configured before any TCP/IP functionality is available. To set the IP address, use one of the following methods: EZWebCon; a directed Ping packet; a DHCP, BOOTP, or RARP reply; or commands entered at the command line (Local>) interface. 4.1.1 Using EZWebCon The EPS must have an IP address before you can log into it using EZWebCon. To assign the IP address from EZWebCon: 1. Start EZWebCon. Instructions for installing, running, and using EZWebCon can be found on the distribution CD-ROM. 2. Click on the Lantronix logo menu in the bottom left corner of the EZWebCon window, then select Assign IP Address to Server. 3. Fill in the following information: A. The last three bytes of the EPS's hardware address. The hardware address is printed on the bottom of the Server. B. The desired IP address. C. The subnet, if you wish to use a subnet other than the default. 4 - 2

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
TCP/IP Configuration
4 - 2
4.1 Setting the IP Address
The EPS IP address must be configured before any TCP/IP functionality is available.
To set the IP address, use one of the following methods: EZWebCon; a directed Ping packet; a
DHCP, BOOTP, or RARP reply; or commands entered at the command line (Local>) interface.
4.1.1 Using EZWebCon
The EPS must have an IP address before you can log into it using EZWebCon. To assign the IP
address from EZWebCon:
1.
Start EZWebCon. Instructions for installing, running, and using EZWebCon can be found
on the distribution CD-ROM.
2.
Click on the Lantronix logo menu in the bottom left corner of the EZWebCon window,
then select
Assign IP Address to Server
.
3.
Fill in the following information:
A.
The last three bytes of the EPS’s hardware address. The hardware address is printed
on the bottom of the Server.
B.
The desired IP address.
C.
The subnet, if you wish to use a subnet other than the default.