Lantronix EPS2-100 EPS2-100 - Install Guide - Page 51
LAT Configuration, Print Server Reference Manual on the CD-ROM.
View all Lantronix EPS2-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
LAT Configuration 6 - LAT Configuration The EZWebCon configuration software is the easiest way to configure the EPS. The following sections cover print configuration methods for LAT hosts. NOTE: The Server needs an IP address before you can use EZWebCon. See the Setting the IP Address section on page 4-2 for instructions. NOTE: To use LAT you must obtain a LAT license from your dealer or Lantronix and use the Set/Define Protocol LAT License command on your EPS. LAT print queues can be created by printing to a port or printing to a service. Printing directly to a port requires no EPS configuration. NOTE: Printing directly to a port is the easiest method for printing to the EPS. If you would like instructions for printing to a service, see the Print Server Reference Manual on the CD-ROM. 6 - 1