Lantronix EPS2-100 EPS2-100 - Install Guide - Page 55
AppleTalk Configuration, 7.1 Bitronics, Define Port, Bitronics Enabled
View all Lantronix EPS2-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
AppleTalk Configuration 7 - AppleTalk Configuration The EZWebCon configuration software is the easiest way to configure the EPS. The following sections cover print configuration methods for AppleTalk hosts. NOTE: The Server needs an IP address before you can use EZWebCon. See the Setting the IP Address section on page 4-2 for instructions. NOTE: Macintoshes that do not support EtherTalk will need either an Ethernet card or a LocalTalk-to-EtherTalk router to use the EPS. 7.1 Bitronics The EPS advertises its printer as a LaserWriter. Therefore, printing from a Macintosh is only possible with a PostScript printer and bi-directional communication between the EPS and that printer. NOTE: MacOS 8.1 can also print via LPD. See the Print Server Reference Manual located on CD-ROM for configuration instructions. The EPS supports the Bitronics interface, an extension to the standard Centronics interface. Printers that support Bitronics allow bi-directional communication via the parallel port. To enable Bitronics on an EPS parallel port, use the Define Port n Bitronics Enabled command. 7 - 1