Lantronix EPS2-100 EPS2-100 - Install Guide - Page 71
J - Pinouts, J.1 Parallel Information, J - 1, IEEE Std 1284-1994
View all Lantronix EPS2-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Pinouts J - Pinouts J.1 Parallel Information Lantronix uses standard Centronics parallel connectors. For optimum performance of your Server, Lantronix recommends the use of high quality parallel cables. Choose one of the following: A Lantronix parallel port cable, part number #500-011 (6 feet). Any other brand of IEEE Std 1284-1994 compliant cable. Compliant cables can easily be identified by the permanent label IEEE Std 1284-1994 compliant on the cable itself. NOTE: Non-compliant cables have the same type of connectors but different electrical characteristics. J.2 Serial Information Lantronix servers are RS-423 compliant, and are thus limited by the equipment at the remote end of the serial line. If the Server is connected to an RS-232 device, it is subject to RS-232 limits: 15m (50 ft.) in length at 9600 baud, and to 2m (6 ft.) at 115.2K baud, although they will generally work at longer lengths. J - 1