Lantronix EPS2-100 EPS2-100 - Install Guide - Page 93
M - Frequently-used Commands, M - 1, Enabled, Disabled
View all Lantronix EPS2-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Frequently-used Commands M - Frequently-used Commands This appendix lists some of the most frequently-used commands of the Print Server command set. More information about the command set, including additional options, can be found in the Print Server Reference Manual on the CD-ROM. Please note the following before continuing: Commands are divided into Server (general), Port, and Protocol sections. Within each section, commands are listed alphabetically. Commands may require privileged user status. Enter Set Privileged, then enter the privileged password when prompted. When you enter a Define or Purge command, you must reboot the Server for the command to take effect. When the abbreviated syntax "{EN|DIS}" is shown, you must choose either Enabled or Disabled to complete the command. When nn is shown, enter a single port number, a list of port numbers separated by commas, a range of port numbers separated by dashes, or the word all. M - 1