Lantronix EPS2-100 EPS2-100 - Install Guide - Page 63

I - Troubleshooting, I.1 Power-Up Troubleshooting, Table I-1

Get Lantronix EPS2-100 PDF manuals and user guides View all Lantronix EPS2-100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 63 highlights

Troubleshooting I - Troubleshooting I.1 Power-Up Troubleshooting There are several possible error situations if the LEDs do not flash. Table I-1: Error Messages Message Diagnosis/Remedy Power-up diagnostic failure (hardware fail- Note which LED is blinking and its color, then contact your ure) dealer or Lantronix Technical Support. The Server boots but does not try to load the Press the Test button. A brief description of the problem will Flash ROM code be queued to the parallel port and printed. Network Error: The ACT LED will blink yellow 2-3 times per second A. Make sure the Ethernet network cable is properly connected and reboot the server. B. If option A fails to resolve the problem, reload Flash ROM. See Appendix D. I - 1

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
Troubleshooting
I - 1
I - Troubleshooting
I.1 Power-Up Troubleshooting
There are several possible error situations if the LEDs do not flash.
Table I-1:
Error Messages
Message
Diagnosis/Remedy
Power-up diagnostic failure (hardware fail-
ure)
Note which LED is blinking and its color, then contact your
dealer or Lantronix Technical Support.
The Server boots but does not try to load the
Flash ROM code
Press the Test button. A brief description of the problem will
be queued to the parallel port and printed.
Network Error: The ACT LED will blink
yellow 2-3 times per second
A. Make sure the Ethernet network cable is properly con-
nected and reboot the server.
B. If option A fails to resolve the problem, reload Flash
ROM.
See Appendix D
.