Lantronix EPS2-100 EPS2-100 - Install Guide - Page 59
LAN Manager/DLC Configuration, 8.1 DLC Configuration
View all Lantronix EPS2-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
LAN Manager/DLC Configuration 8 - LAN Manager/DLC Configuration The EZWebCon configuration software is the easiest way to configure the EPS. This chapter explains DLC configuration for Windows NT 4.x hosts. Windows 95 does not support DLC printing (see Chapter 4, TCP/IP Configuration, for more information). NOTE: The Server needs an IP address before you can use EZWebCon. See the Setting the IP Address section on page 4-2 for instructions. NOTE: Printing using an LPD client is the preferred method for sending print jobs to the EPS. To print using the TCP/IP protocol see the Using the Command Line Interface section on page 4-8. 8.1 DLC Configuration 8.1.1 Server Configuration To use the DLC protocol, you must have one service with the DLC characteristic enabled. Use the Define Service servicename DLC Enabled command. The DLC characteristic may be associated with only one service on a given EPS. 8.1.2 Host Configuration To send print jobs from a Windows NT host to the EPS, add the EPS as a Windows NT printer. 8 - 1