Lantronix SLC 16 Lantronix SLC - User Guide - Page 59
Apply, To view the IP Routing Table, IP Routes Report, Routing Enable RIP
View all Lantronix SLC 16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Figure 6-7 Routing Page 6: Basic Parameters 2. Enter the following fields. Enable RIP RIP Version Enable Static Routing Select to enable Dynamic Routing Information Protocol (RIP) to assign routes automatically. Disabled by default. Select the RIP version. The default is 2. Select to assign the routes manually. The system administrator usually provides the routes. Disabled by default. To add a static route, enter the IP Address, Subnet Mask, and Gateway for the route and click the Add/Edit Route button. The route displays in the Static Routes table. You can add up to 64 static routes. To edit a static route, select the radio button to the right of the route, change the IP Address, Subnet Mask, and Gateway fields as desired, and click the Add/ Edit Route button. To delete a static route, select the radio button to the right of the route and click the Delete Route button. 3. Click the Apply button. To view the IP Routing Table: 1. Click the IP Routes Report link. Figure 6-8 shows the page that displays. SLC™ Console Manager User Guide 59