Lenovo ThinkCentre E51 Hardware Maintenance Manual - Page 117
system board illustration for your machine type at Identifying parts on
![]() |
View all Lenovo ThinkCentre E51 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
13. Use the thermal grease syringe to place five drops of grease on the top of the microprocessor. Each drop of grease should be 0.03ml (3 tick marks on the grease syringe). 14. Install the heat sink and fan assembly on the system board. 15. Connect the heat sink and fan assembly cable to the system board. See the system board illustration for your machine type at "Identifying parts on the system board" on page 86. 16. Go to "Completing the FRU replacement" on page 116. Chapter 8. Replacing FRUs (Tower computers) 111
![](/manual_guide/products/lenovo-thinkcentre-e50-hardware-maintenance-manual-59d0e2f/117.png)
13.
Use the thermal grease syringe to place five drops of grease on the top of the
microprocessor. Each drop of grease should be 0.03ml (3 tick marks on the
grease syringe).
14.
Install the heat sink and fan assembly on the system board.
15.
Connect the heat sink and fan assembly cable to the system board. See the
system board illustration for your machine type at “Identifying parts on the
system board” on page 86.
16.
Go to “Completing the FRU replacement” on page 116.
Chapter 8. Replacing FRUs (Tower computers)
111