Lenovo ThinkCentre E51 Hardware Maintenance Manual - Page 121
Replacing the power switch/ LED assembly
View all Lenovo ThinkCentre E51 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Replacing the power switch/ LED assembly 1. Remove the front bezel. See "Removing and replacing the front bezel" on page 91. 2. Disconnect the power switch/LED assembly cable from the system board. See the system board illustration for your machine type at "Identifying parts on the system board" on page 86. 3. Remove the power switch/LED assembly by disconnecting it from the inside of the bezel. 4. Install the new power switch/LED assembly into the bezel. 5. Route the cable for the new power switch/LED assembly through the hole in the chassis and to the system board. 6. Reinstall the bezel. See "Removing and replacing the front bezel" on page 91. 7. Reconnect the power switch/LED cable to the system board. 8. Go to "Completing the FRU replacement" on page 116. Chapter 8. Replacing FRUs (Tower computers) 115