Lenovo ThinkCentre E51 Hardware Maintenance Manual - Page 61
Diagnostic error codes
![]() |
View all Lenovo ThinkCentre E51 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Diagnostic error codes Refer to the following diagnostic error codes when using the diagnostic tests. See "Running diagnostics tests" on page 44 for the specific type for information about the Diagnostic programs. In the following index, X can represent any number. Diagnostic Error Code 000-000-XXX BIOS Test Passed 000-002-XXX BIOS Timeout 000-024-XXX BIOS Addressing test failure 000-025-XXX BIOS Checksum Value error 000-026-XXX FLASH data error 000-027-XXX BIOS Configuration/Setup error 000-034-XXX BIOS Buffer Allocation failure 000-035-XXX BIOS Reset Condition detected 000-036-XXX BIOS Register error 000-038-XXX BIOS Extension failure 000-039-XXX BIOS DMI data error 000-195-XXX BIOS Test aborted by user FRU/Action No action 1. Flash the system. See "Flash update procedures" on page 337 2. System board 1. Flash the system. See "Flash update procedures" on page 337 2. System board 1. Flash the system. See "Flash update procedures" on page 337 2. System board 1. Flash the system. See "Flash update procedures" on page 337 2. System board 1. Run Setup 2. Flash the system. See "Flash update procedures" on page 337 3. System board 1. Reboot the system 2. Flash the system. See "Flash update procedures" on page 337 3. Run memory test 4. System board 1. Flash the system. See "Flash update procedures" on page 337 2. System board 1. Flash the system. See "Flash update procedures" on page 337 2. System board 1. Flash the system. See "Flash update procedures" on page 337 2. Adapter card 3. System board 1. Flash the system. See "Flash update procedures" on page 337 2. System board Information only Re-start the test, if necessary Chapter 7. Symptom-to-FRU Index 55
![](/manual_guide/products/lenovo-thinkcentre-e50-hardware-maintenance-manual-59d0e2f/61.png)