Lenovo ThinkCentre M51 Hardware Maintenance Manual - Page 138
orientation
View all Lenovo ThinkCentre M51 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
3. Disconnect the signal and power cables from the rear of the hard disk drive. 4. By pulling on the blue handle, remove the hard disk drive and plastic bracket from the drive bay. 5. Note the orientation of the hard disk drive in the plastic bracket. 6. Remove the drive by flexing the plastic enough to slide the drive out. 7. Install the new hard disk drive into the plastic bracket by flexing the plastic enough to insert the drive. 8. Install the hard disk drive and bracket into the bay until it snaps into position. 9. Reconnect the signal and power cables to the drive. 10. To complete the installation, go to "Replacing the cover and connecting the cables" on page 135. Removing and replacing the optical drive 1. Remove the cover. See "Removing the cover" on page 116. 2. Disconnect the signal and power cables from the rear of the optical drive. 3. Release the optical disk drive by pressing on the blue retainer lever at the side of the drive and removing it from the front of the computer. 132 Hardware Maintenance Manual