Lenovo ThinkPad 600E Hardware Maintance Manual - June 1999: ThinkPad 600, 600E - Page 47
PC Card Slots Test, Universal Serial Bus (USB) Test, USB-1
View all Lenovo ThinkPad 600E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Running the Diagnostics PC Card Slots Test The green LED on the PC test card turns on when the PC Card slot test is running. If the LED does not turn on, check that the card is installed correctly by reseating it. If the LED still does not turn on after the card is reseated, try using another slot for the test. If the LED still does not turn on and the test fails, replace the FRU shown by the diagnostic error code. Universal Serial Bus (USB) Test At the advanced diagnostic window, do the following: 1. Connect the USB parallel test cable to the parallel connector of the computer. 2. Connect Connector 1 of the cable to the USB connector of the computer. Note: The illustration shows a ThinkPad 770 computer, but the procedure is the same for the other model. 3. Click on USB-1 to run the test. Follow the instructions on the screen. OK appears if the test passed, but three lines of error codes appear if the test failed. The defective FRU must be the system board. If you want to test the USB port on the port replicator, connect the USB parallel test cable to a port replicator and click on USB-2. If you want to test the USB ports on a docking station, connect the USB parallel test cable to the General Descriptions 41