Lenovo ThinkPad T430s Hardware Maintenance Manual - ThinkPad T430s and T430si - Page 46

Error messages, Beep symptoms, Table 1. Numeric error codes continued, Table 2. Error messages - memory install

Get Lenovo ThinkPad T430s PDF manuals and user guides View all Lenovo ThinkPad T430s manuals
Add to My Manuals
Save this manual to your list of manuals

Page 46 highlights

Table 1. Numeric error codes (continued) Symptom or error 2102 Detection error on HDD2 (Mini SATA) 2110 Read error on HDD0 (Main HDD) 2111 Read error on HDD1 (Ultrabay HDD) 2112 Read error on HDD2 (Mini SATA) 2200 Machine Type and Serial Number are invalid. 2201 Machine UUID is invalid. FRU or action, in sequence 1. Reseat the Mini SATA device. 2. Mini SATA device. 3. System board. 1. Reseat the hard disk drive. 2. Main hard disk drive. 3. System board. 1. Reseat the hard disk drive. 2. Ultrabay hard disk drive. 3. System board. 1. Reseat the Mini SATA device. 2. Mini SATA device. 3. System board. System board. System board. Error messages Table 2. Error messages Symptom or error Fan error. Thermal sensing error. The battery installed is not supported by this system and will not charge. Please replace the battery with the correct Lenovo battery for this system. Press the ESC key to continue. FRU or action, in sequence 1. Fan. 2. Thermal grease. 3. System board. System board. Replace the battery. Beep symptoms Table 3. Beep symptoms Symptom or error FRU or action, in sequence One beep and a blank, unreadable, or flashing LCD. 1. Reseat the LCD connector. 2. LCD assembly. 3. External CRT. 4. System board. One long and two short beeps, and a blank or unreadable LCD. 1. System board. 2. LCD assembly. 3. memory module. Two short beeps with error codes. POST error. See Numeric error codes. Two short beeps and a blank screen. 1. System board. 2. memory module. Two or more beeps, or a continuous beep. Operating system starts successfully. If a mini-PCI Ethernet card is installed, confirm that Alert On LAN 2 in ThinkPad Setup is disabled. 40 Hardware Maintenance Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
Table 1. Numeric error codes (continued)
Symptom or error
FRU or action, in sequence
2102
Detection error on HDD2 (Mini SATA)
1.
Reseat the Mini SATA device.
2. Mini SATA device.
3. System board.
2110
Read error on HDD0 (Main HDD)
1.
Reseat the hard disk drive.
2. Main hard disk drive.
3. System board.
2111
Read error on HDD1 (Ultrabay HDD)
1.
Reseat the hard disk drive.
2. Ultrabay hard disk drive.
3. System board.
2112
Read error on HDD2 (Mini SATA)
1.
Reseat the Mini SATA device.
2. Mini SATA device.
3. System board.
2200
Machine Type and Serial Number are invalid.
System board.
2201
Machine UUID is invalid.
System board.
Error messages
Table 2. Error messages
Symptom or error
FRU or action, in sequence
Fan error.
1.
Fan
.
2. Thermal grease.
3. System board.
Thermal sensing error.
System board
.
The battery installed is not supported by this system
and will not charge. Please replace the battery with the
correct Lenovo battery for this system. Press the ESC
key to continue.
Replace the battery.
Beep symptoms
Table 3. Beep symptoms
Symptom or error
FRU or action, in sequence
One beep and a blank, unreadable, or flashing LCD.
1.
Reseat the LCD connector
.
2. LCD assembly.
3. External CRT.
4. System board.
One long and two short beeps, and a blank or unreadable
LCD.
1.
System board
.
2. LCD assembly.
3. memory module.
Two short beeps with error codes.
POST error. See Numeric error codes.
Two short beeps and a blank screen.
1.
System board
.
2. memory module.
Two or more beeps, or a continuous beep. Operating
system starts successfully.
If a mini-PCI Ethernet card is installed, confirm that
Alert
On LAN 2
in ThinkPad Setup is
disabled
.
40
Hardware Maintenance Manual