Lenovo ThinkPad T430s Hardware Maintenance Manual - ThinkPad T430s and T430si - Page 79
When installing, Removal steps of mSATA solid-state drive, Attention, After installing the drive
View all Lenovo ThinkPad T430s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
6 6 When installing: Plug the red cable into the connector labeled MAIN, and the blue cable into the connector labeled AUX on the card. Removal steps of mSATA solid-state drive Attention: • Do not drop the drive or apply any physical shock to it. The drive is sensitive to physical shock. Improper handling can cause damage and permanent loss of data. • After installing the drive, go to http://www.lenovo.com/support for instructions on configuring the drive. Note: Remove the screws 1 . 1 Step 1 Screw (quantity) M2 × 5 mm, flat-head, nylon-coated (2) Color Black Torque 0.181 Nm (1.85 kgfcm) Chapter 9. Removing or replacing a FRU 73
6
6
When installing:
Plug the red cable into the connector labeled
MAIN
, and the blue cable into the connector labeled
AUX
on the card.
Removal steps of mSATA solid-state drive
Attention:
•
Do not drop the drive or apply any physical shock to it. The drive is sensitive to physical shock. Improper
handling can cause damage and permanent loss of data.
•
After installing the drive, go to http://www.lenovo.com/support for instructions on configuring the drive.
Note:
Remove the screws
1
.
Step
Screw (quantity)
Color
Torque
1
M2 × 5 mm, flat-head, nylon-coated (2)
Black
0.181 Nm
(1.85 kgfcm)
Chapter 9
.
Removing or replacing a FRU
73