Lenovo Y310 Y310 User's Guide - Page 55

Turn off the computer, Attention

Get Lenovo Y310 PDF manuals and user guides View all Lenovo Y310 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 55 highlights

Lenovo 3000Y310 UG.book Page 47 Friday, September 14, 2007 4:24 PM Replacing Memory To install an SO-DIMM, do the following: 1. Touch a metal table or a grounded metal object. This action reduces any static electricity in your body, that could damage the SO-DIMM. Do not touch the contact edge of the SO-DIMM. 2. Turn off the computer; then disconnect the ac adapter and all cables from the computer. 3. Close the computer display, and turn the computer over. 4. Remove the battery. 5. Unfasten the five screws a on the cover and remove the cover b. 1 1 1 1 2 1 6. Find the notch on the contact edge side of the SO-DIMM. Attention: To avoid damaging the SO-DIMM, do not touch its contact edge. 7. With the notched end of the SO-DIMM toward the contact edge side of the socket, insert the SO-DIMM into the socket at an angle of about 20 degrees, then press it in firmly a. 1 Chapter 5. Upgrading and Replacing Devices 47

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
Replacing Memory
Chapter 5. Upgrading and Replacing Devices
47
To install an SO-DIMM, do the following:
1.
Touch a metal table or a grounded metal object. This action reduces any
static electricity in your body, that could damage the SO-DIMM. Do not
touch the contact edge of the SO-DIMM.
2.
Turn off the computer
; then disconnect the ac adapter and all cables
from the computer.
3.
Close the computer display, and turn the computer over.
4.
Remove the battery.
5.
Unfasten the five screws
a
on the cover and remove the cover
b
.
6.
Find the notch on the contact edge side of the SO-DIMM.
Attention:
To avoid damaging the SO-DIMM, do not touch its contact edge.
7.
With the notched end of the SO-DIMM toward the contact edge side of
the socket, insert the SO-DIMM into the socket at an angle of about
20 degrees, then press it in firmly
a
.
2
1
1
1
1
1
1
Lenovo 3000Y310 UG.book
Page 47
Friday, September 14, 2007
4:24 PM