Lexmark 22Z0000 User Manual - Page 126

Menu item Honor DSR Off On Description Determines whether the printer uses the DSR Signal Notes: • Off is the factory default setting. • DSR is a handshaking signal used by most serial cables. The serial port uses DSR to distinguish data sent by the computer from data created by electrical noise in the serial cable. The electrical noise can cause stray characters to print. Set this to On to prevent stray characters from printing. SMTP Setup menu Menu item Primary SMTP Gateway Primary SMTP Gateway Port Secondary SMTP Gateway Secondary SMTP Gateway Port SMTP Timeout 5-30 Reply Address Use SSL Disabled Negotiate Required SMTP Server Authentication No authentication required Login/Plain CRAM-MD5 Digest-MD5 NTLM Kerberos 5 Description Specifies SMTP server gateway and port information Note: 25 is the default SMTP gateway port. Specifies the amount of time in seconds before the server stops trying to send an e-mail Note: 30 seconds is the factory default setting. Specifies a reply address of up to 128 characters in the e-mail sent by the printer Sets the printer to use SSL for increased security when connecting to the SMTP server Notes: • Disabled is the factory default setting. • When the Negotiate setting is used, the SMTP server determines if SSL will be used. Specifies the type of user authentication required for scan to e-mail privileges Note: "No authentication required" is the factory default setting. Understanding printer menus 126