Lexmark 22Z0000 User Manual - Page 145

Menu item Paper Saver Ordering Horizontal Reverse Horizontal Reverse Vertical Vertical Paper Saver Orientation Auto Landscape Portrait Paper Saver Border None Solid Staple Job Off Auto Back Dual Dual Double Front Hole Punch Off On Hole Punch Mode 2 holes 3 holes 4 holes Offset Pages None Between Copies Between Jobs Description Specifies the positioning of multiple-page images when using Paper Saver Notes: • Horizontal is the factory default setting. • Positioning depends on the number of page images and whether they are in portrait or landscape orientation. Specifies the orientation of a multiple-page document Note: Auto is the factory default setting. The printer chooses between portrait and landscape. Prints a border on each page image when using Paper Saver Note: None is the factory default setting. Specifies whether the prints are stapled Notes: • Off is the factory default setting. • This menu only appears when the printer is equipped with a stapler. Specifies whether the prints have punched holes Note: This menu only appears when the printer is equipped with a puncher. Determines the type of punch finishing performed on a printed output Notes: • "2 holes" is the factory default setting regardless of hardware. • "3 holes" and "4 holes" only appear when their respective hole punch hardware is installed. Offsets pages at certain instances Notes: • None is the factory default setting. • Between Copies offsets each copy of a print job if Collate is set to On. If Collate is set to Off, each set of printed pages are offset, such as all page 1's and all page 2's. • Between Jobs sets the same offset position for the entire print job regardless of the number of copies printed. • This menu only appears when a stapler finisher is installed. Understanding printer menus 145