Lexmark 22Z0000 User Manual - Page 224
USB/parallel interface card does not operate correctly, Solving paper feed problems
View all Lexmark 22Z0000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 224 highlights
MAKE SURE THE NETWORK SOFTWARE IS CONFIGURED CORRECTLY For more information on installing the network printing software, do the following: 1 Open the Software and Documentation CD. 2 Click Additional. 3 Under Publications on this CD, select Networking Guide. USB/parallel interface card does not operate correctly CHECK THE USB/PARALLEL INTERFACE CARD CONNECTION Make sure the USB/parallel interface card is securely connected to the printer system board. CHECK THE CABLE Make sure you are using the correct cable and that it is securely connected. Solving paper feed problems Paper frequently jams These are possible solutions. Try one or more of the following: CHECK THE PAPER Use recommended paper and specialty media. For more information, see the chapter about paper and specialty media guidelines. MAKE SURE THERE IS NOT TOO MUCH PAPER IN THE PAPER TRAY Make sure the stack of paper you load does not exceed the maximum stack height indicated in the tray or on the multipurpose feeder. CHECK THE PAPER GUIDES Move the guides in the tray to the correct positions for the paper size loaded. THE PAPER MAY HAVE ABSORBED MOISTURE DUE TO HIGH HUMIDITY • Load paper from a fresh package. • Store paper in its original wrapper until you use it. Troubleshooting 224