Lexmark 22Z0000 User Manual - Page 42
Order Of Installation, Caution-tipping Hazard, Caution-shock Hazard, Caution-potential Injury
View all Lexmark 22Z0000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
3 Remove the screws while holding the printer hard disk in place, and then remove the printer hard disk. 4 Set the printer hard disk aside. 5 Reattach the system board cover. Order of installation CAUTION-TIPPING HAZARD: Floor-mounted configurations require additional furniture for stability. You must use either a printer stand or printer base if you are using a high-capacity input tray, a duplex unit and an input option, or more than one input option. If you purchased a multifunction printer (MFP) that scans, copies, and faxes, you may need additional furniture. For more information, contact the place where you purchased the printer. CAUTION-SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer. CAUTION-POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained personnel to lift it safely. Install the printer and any optional trays or finishers you have purchased in the following order: Additional printer setup 42